Are you considering getting rid of your older piece of furniture that is made from wood? It’s not hard to give the older wood table and chair fresh chance to live by stripping off the previous coating and applying a new coat of color. This article shows how to paint wooden furniture using a few easy steps to obtain an even finish. The tutorial has been split into two parts. The first will teach what you need to do to clean the surfaces and the second step, you will be taught how what to do with the painted.
Materials Needed
- Drop Cloth
- Sandpaper, Various Grits
- Spray-On Oil-Based Primer
- Oil-Based Paint
Tools Needed
- Scraper Tool
- Palm Sander
- Tack Cloth
- Nylon Bristle Brush
- Safety Gear
Prepare the Surface (Step 1)
The proper arrangement of your furniture and space prior to painting will help ensure a easy procedure. Utilize these guidelines to paint furniture an enjoyable task.
1. Remove the doors and drawers off
Take the shelves out as well as drawers and hardware you intend to paint the interior. Repair any joints that are loose or putty-damaged or damaged areas. Sand dry putty with the assistance of a sponge with a 220-grit.
2. Test for Lead
Before you begin, ensure that the coating you’re removing doesn’t contain lead. Lead testing kits from local store. These guidelines are only applicable to paint that is not positive for lead.
3. Clean loose paint
Scrape away any loose paint. Be cautious and be careful not scratch the wood by placing it in the same direction as the wood, and applying the same pressure.
4. Sand and clear
If the surface is already having a surface that is smooth, use the sanding sponge 220-grit. Clean them by wiping them with a damp towel. In the event that your surface appears rough you can use the 180- or 220-grit sanding spongeand then clean them. It is possible that you will require hand sanding to get into the cracks in your furnishings. When you’re finished, wash the furniture using a cotton tack cloth in order to eliminate dust.
5. Mask off Areas
Make use of painter’s tape to cover the areas that you don’t want to paint, such as cabinet drawers, interior cabinets, as well as hardware and hinges that you aren’t able to remove.
6. Apply Primer
Make use of a spray primer in order to achieve an even, neat coverage. Select a white primer for lighter-colored paint, and an older primer to match darker-colored paint for uniform coverage. Start by spraying the bottom of the piece. Spray slowly and carefully to make a consistent spray pattern, avoiding drips and over-spray. Create an in-and-out motion that is in line with the natural lines of your furniture. Apply 2 to three coats of light coatings, and let for the primer’s drying between coats completely. Be sure to read the warning on the primer since drying times differ.
7. Sand, if Needed
If the surface appears uneven after primer is dry you can gently smooth the surface using fine sandpaper and then wipe it clean with a tack cloth to get off any dust.
Painting the Wood Furniture (Step 2)
Make your furniture appear more attractive by changing the design of your furniture, or even protect the furniture’s surface by applying paint. Apply the paint in the following manner.
8. Prepare the Work Area
Set up your workspace in a place that is not exposed to intense sunlight as well as powerful winds. Be sure to have adequate ventilation to let out the fumes of paint. Give yourself enough space to walk around the area you’re painting. Vacuum any debris and dust around the area where you’ll applying the paint, specifically the ceiling and the floor. Clean the air to ensure that dust doesn’t accumulate on the freshly painted surface and then wash off any dust that’s built up on the wood’s surface.
9. Modify the lighting
Make use of a portable adjustable light. Adjust it to match the painting surface you’ll be using. The angle of light creates shadows that help you identify scratches, drips or drips.
10. Paint the Furniture
The piece of art should be painted with smooth strokes, using your natural lines of the art. Pick a top-quality bristle made from nylon to get the most efficient outcomes. Additionally make sure to repeat the stroke in order to make sure you have an smooth surface. If you see drips, gently move the brush across an area of the surface to stop it, and smooth it out before moving on. Apply between two and three coats, and allow the paint to fully cool between coats. Check your label inside the bottle of paint because drying times vary depending on the type of paint.
